LIBERTY Volkswagen Routan Owner’s Manual

1. Lower the head rest and lift the seatback actuating handle located on the outside surface of the bucket seat in order to fold the seatback flat as shown below.

2. Locate the seat release belt at the back of the seat as shown in Figure 5.Pull on the belt in an upward and outward direction as shown in figure 6 until the rear latches are released from the rod on the base attachment.

3. Lift the rear end of the seat as shown in Figure 7

4 Holding both ends of the seat, move it backwards at an angle as shown in figure 8 until the slot on the seat attachment clears the front rod on the base attachment. See Figure9.Once the slot is free of the rod; lift the seat up and away from the base attachment as shown in Figure 10.

Refitment

1. Position the seat as with front end lowered shown in Figure 11.

2. Align seat attachment with the base attachment on the van floor. Engage slots on seat attachment with front rod on base attachment at the front end as shown in Figure 12.

3. Route the rope cable under the front bar, and then to the back of the seat.

4. Lower the rear portion of the seat firmly until the latches on the back of the seat attachment lock on to the rear rod on the base attachment.